Docking Module

The Docking Module handles docking procedures for the grid.

Caution

Docking is only recommended in space at this time. Undocking is not supported, but is coming soon. If undocking is just thrusting away from the connector, consider leveraging the thrust command with the wait command.

Commands

dock

Dock with a grid and specify optional connectors. If you do not provide a connector, the grids will automatically select the connectors to use. This is most useful when you are building drones, and utility vehicles with only one connector. Mother will only use connectors that are On and in a Unconnected state to reduce the changes of a collision or unsafe docking procedure.

dock <Grid Name> [--options]

Options

Option	Values	Unit	Description
`local`	string		The name of the connector you wish to use on the local grid.
`remote`	string		The name of the connector you wish to use on the remote grid.

Example

We want to dock with a grid named Mothership using the local grid's connector named MainConnector, and the remote grid's connector named Connector - MS.P1.

Terminal
; Specify both connectors by name
dock Mothership --local=MainConnector --remote="Connector - MS.P1";

; If there is one connector on our grid, we only specify the remote connector
dock Mothership --remote="Connector - MS.P1";

; Or we let the grids decide which connectors to use
dock Mothership;

Configuration

Key	Value	Description
`appDistance`	meters	The distance the approaching grid should approach from. Default is 30m. This is set on the connector to be used for docking.

Example

DockConnector > Custom Data
[general]
; Set the approach distance to 50 meters from the connector face
appDistance=50